Turbosound IQ10 2500W Active Speaker

SKU: iQ10

$1,175.00
RRP $1,499.00
SAVE $324.00
Share:





iQ10

2500 Watt 2 Way 10" Powered Loudspeaker with KLARK TEKNIK DSP Technology, Speaker Modelling and ULTRANET Networking

  • 2 way full range loudspeaker for portable PA and installation applications
  • 2,500 Watt power featuring KLARK TEKNIK Class-D technology
  • KLARK TEKNIK Digital Signal Processing for total system control
  • Speaker modelling includes accurate models of industry standard speakers
  • SCC (Spatial Contour Control) compensates frequency response in relation to physical speaker placement
  • ULTRANET digital audio networking connects to mixers and other sources
  • 10" low frequency driver with low mass voice coil for improved transient response
  • High temperature 1" compression driver with copper-clad aluminium voice coil for extended high frequency reproduction
  • Fully featured user interface with LCD display for ease of navigation
  • PC remote control software downloadable at turbosound.com
  • Lightweight fibre glass reinforced composite enclosure
  • Rugged powder coated perforated steel mesh grille
  • Dual angle pole mount for accurate audience coverage
  • Multiple internal rigging points for installation applications
  • Mains input and link output on Neutrik powerCON* connectors
  • 3-Year Warranty Program*
  • Designed and engineered in England

Technical Specifications

System
Frequency response 55 Hz – 18 kHz ±3 dB
50 Hz – 20 kHz -10 dB
Nominal dispersion 90° H x 60° V @ -6 dB points
Maximum SPL 129 dB peak
Crossover type Active
Transducers 1 x 10" (256 mm) LF driver
1 x 1" (25.4 mm) HF compression driver
Limiter Independent HF, LF, peak and rms
Amplifier
Maximum output power* 2,500 W
Type Class-D
Protection Short circuit, open circuit, thermal
Connectors
Input A / B
2 x combo jack/XLR
Sensitivity
Line +4 dBu, mic -22 dBu, switchable
Input impedance
20 kΩ unbalanced, 40 kΩ balanced
Maximum input level
+21 dBu
Output A / B
2 x XLR Linked to input
Mix output XLR, balanced
Output impedance 100 Ω unbalanced, 200 Ω balanced
Ultranet input/link 2 x RJ45
Mains Supply Neutrik powerCON input 20A and link 15A
Controls
DSP Rotary push-encoder
Buttons for PROCESS, SETUP, EXIT, ENTER
Mixer section 2 x gain controls (channels A and B)
2 x Line/Mic switch
User DSP Functions
Factory EQ presets Positioning, Sound mode
Sound modeling, FBQ
Display LCD 128 x 32, blue backlit
Delay 0 - 300 ms
Equalisation High and low shelving EQ
2 x parametric EQ
Limiter Zero attack input limiter
Presets 20 total presets, 19 user-definablenable
Crossover High Pass L-R 24 dB/oct
Protection Lock-out function for all settings
Ultranet Digital Network
System
Signal 16 channels
Latency < 0.9 ms
Cabling
Cables Shielded CAT5
Cable length max. 246 ft / 75 m recommended
Enclosure
Dimensions HWD 526 x 324 x 316 mm(20.7 x 12.7 x 12.4")
Net weight 17.2 kg (38 lbs)
Construction Injection-moulded polypropylene enclosure
Finish Black painted
Grille Powder coated perforated steel
Flying hardware M10 x 3 points

SKU iQ10
Brand Turbosound


Free pick-up from store - $0.00
Free pick-up in store from 197 Morayfield Road, Morayfield QLD 4506.

Be The First To Review This Product!

Help other Guitar Exchange users shop smarter by writing reviews for products you have purchased.

Write a product review